Wheel geometry Brno

Service Description

🛠️ Wheel geometry Brno (axle alignment) is essential for safety and your wallet. Bad geometry means worse stability, longer braking distances and rapid tire wear (often “on one edge”). It is also manifested by vibrations, car swimming and a crooked steering wheel. When does geometry make sense (most common reasons) ✅ 🛞 Tires wear unevenly (inside/outside, jagged) 🧷 Car pulls to one side, steering wheel is not straight 🚧 After hitting a pothole, curb, after an accident 🔧 After replacing chassis parts 🧭 After replacing steering or intervention in axles What we do during the service ✅ 🔍 Initial check of clearances (pins, silent blocks, bearings) if there is clearance, the geometry will not hold 📏 Geometry measurement (toe-in/camshaft/tilt according to the car's capabilities) 🔧 Adjusting values to the manufacturer's recommended tolerances 📄 Output protocol (before/after) 🚗 Short inspection drive (depending on the situation) 📌 Important: if there is clearance on the chassis or rusty eccentrics/bolts, it may be necessary to repair the mechanics first. 7) Price 💰 Geometry measurement + protocol – from 690 CZK 💰 Geometry adjustment (1 axle) – from 990 CZK 💰 Geometry adjustment (2 axles) – from 1,490 CZK 💰 Stuck/rusty adjustment elements – from 390 CZK (depending on time and condition) 📌 The price may be affected by the type of axles, the extent of adjustment and the condition of the screws / joints 8) Duration ⏳ 45–90 minutes (complications with stuck screws may extend the time) 🎁 Bonus 🎁 🔧 Checking the chassis clearances (pins, silent blocks, stabilizer bars) 🧰 Loosening and preserving the adjustment elements (let's do it next time) 🚗 Checking the tire pressure and condition + replacement recommendations